PRI Manager Version 2.2 
          	      ==================================
          		   Copyright(c) by Prilink Ltd.



   	PRI Manager version 2.2 allows automatic daily and weekly downloads.
	In addition, it provides simultaneous access to real-time data from multiple sites.


Installation procedures:

1.1 INSTALLATION (s/w downloaded from web)  

        1. Make sure white or blue security key is attached to computer.
      	2. Download "memo.exe" if your software key is white, ("time.exe" if the key is blue)
           from www.prilink.com. The files are located in "Download" page.
	2. Run the self-extracted memo.exe/time.exe file. It will generate the following
           files into c:\temp directory.
		Main.cap
		Setup.exe
		Setup.lst
		readme.txt
	3. Run Setup.exe, this will install PRI-manager software in the c:\PRI_MANAGER directory
	

1.2 INSTALL "hinstall.exe" 
	
        The application is protected by a white or blue security key.  In order to run the application,
        a device driver must be installed. The driver software: "hinstall.exe",  can be downloaded from
        www.prilink.com download page. 

          1.  From "Start" menu, click "Run"
          2.  Type "c:\(the path where your downloads are saved)\hinstall.exe -i"
	  3.  OR, at MS-DOS Prompt, run "hinstall.exe -i"
          4.  reboot PC to enable driver.

          NOTE: For NT work station, you must log-on as administrator to install the driver.



2.1 ENABLE A SITE
	
        1. Select a free entry in the list, then click on the command button 
	   <EDIT> on the right side of the window. This enables the configuration window. 
	2. Enter a name for the site
	3. Click on the <Enable> option button.


2.2 ENABLE AUTOMATIC DOWNLOAD

        On the left side of the configuration window, you will find the Download
	configuration section. To enable automatic downloads, follow the 
	steps bellow:

	1. Click on the <enable> button, by default, daily download is selected
	2. Choose weekly download; click on the <Wkly> button
	3. Select your day (Sun to Sat) if weekly download is enabled
	4. Click on the dropdown boxes to choose your time


2.3 ENABLE LAN FOR DOWNLOAD
        
	In the "settings" section on the right side of the window.

	1. Click on the option button labeled with <LAN>
	2. Fill in IP address
	3. Click on <OK> to exit and save the configuration

2.4 ENABLE COM FOR DOWNLOAD
	
        (NOTE: FIRST FIND OUT THE COM PORT ASSIGNED TO THE ACTIVE MODEM.  THIS IS DONE
         BY GOING TO CONTROL PANEL, CLICKING MODEM AND CHOOSING PROPERTIES.)
 
	In the "settings" section on the right side of the configuration window.

	1. Click on the option button labeled with "COM"
	2. Select a COM port in the dropdown list
	
	If it is direct connection, click <OK> button to exit and save the 
	configuration. If it is a modem connection, click <modem>

	1. Select a modem type, "Hayes" is default
	2. Fill in phone number, click <OK> to exit and save configuration.

** New features in version 2.2

	You are now able to view real time data from one or more sites at same time.
	To do this:
	
	1. Highlight an entry in the list
	2. Double clicks the entry or click on the <connect> button
           (connection and initialization may take about 30 seconds)